In order to compensate for the heat expansion one side of the connector is mounted as a loose bearing. The given torques must be observed. The other side of the connector is to be mounted as a fixed bearing. A minimum distance of 4mm must be kept between the cable ladders. This article is available made in material No. 1.4571/1.4404 (V4A) stainless steel finish.
Continously hot galvanized (Sendzimir process) (DIN EN 10346)
| height | length | weight | ||
|---|---|---|---|---|
| WPV 150S | 150 mm | 600 mm | 1.79 kg |
Hot-dip galvanized, according to BS 729 (DIN EN ISO 1461)
| height | length | weight | ||
|---|---|---|---|---|
| WPV 150F | 150 mm | 600 mm | 1.92 kg |
Stainless steel, according to ASTM 304 / BS 304 S 3
| height | length | weight | ||
|---|---|---|---|---|
| WPV 150E | 150 mm | 600 mm | 1.79 kg |
Downloads
PDF | 29 MB Contact us
Whatever you're planning.
We are pleased to provide you with advice for every product application. Please contact us when you need assistance or require special custom solutions.